Synthesis and Effect of CaTiO3 formation in CaO·Al2O3 by Solid-State Reaction from CaCO3· Al2O3 and Ti

CaO⋅Al2O3/CaTiO3 material was synthesized by a solid-state reaction. The effects of CaTiO3 formed into the CaO⋅Al2O3 during the synthesized process on the microstructure and mechanical properties were studied. CaCO3 was obtained from snail shells, Al2O3, and Ti powders were employed as a raw material. A chemical system with a 1:1 M ratio between CaCO3 and Al2O3 was formed, with an addition of 10 wt% Ti metallic particles. The microstructural analysis through optical microscopy, scanning electron microscopy, and X-ray diffraction was realized. The apparent density was determined by the Archimedes method, and the mechanical behavior (hardness, fracture toughness, and transversal elastic modulus) were also determined. XRD analysis revealed the formation of calcium aluminate phases such as CaAl2O4, CaAl4O7, and CaAl12O19; in addition, the CaTiO3 phase was also identified. The in-situ formation of CaTiO3 in the ceramic material, improves the mechanical properties such as the transversal elastic modulus and fracture toughness (48 GPa and 1.32 MPa m1/2, respectively) in comparison to the reference material (55 GPa and 0.43 MPa m1/2, respectively). Changes in the microstructural morphology, bulk density, and hardness values were also observed with a positive effect in the compound material

The Parol Evidence Rule in North Carolina

The KASCADE-Grande observatory was a ground-based air shower array dedicated to study the energy and composition of cosmic rays in the energy interval E = 1 PeV –1 EeV. The experiment consisted of different detector systems which allowed the simultaneous measurement of distinct components of air showers (EAS), such as the muon content. In this contribution, we study the total muon number and the lateral density distribution of muons in EAS detected by KASCADE-Grande as a function of the zenith angle and the total number of charged particles. The attenuation length of the muon content of EAS is also measured. The results are compared with the predictions of the SIBYLL 2.3 high-energy hadronic interaction model

Long- and short-range correlations and their event-scale dependence in high-multiplicity pp collisions at 1as = 13 TeV

Two-particle angular correlations are measured in high-multiplicity proton-proton collisions at s = 13 TeV by the ALICE Collaboration. The yields of particle pairs at short-( 06\u3b7 3c 0) and long-range (1.6 < | 06\u3b7| < 1.8) in pseudorapidity are extracted on the near-side ( 06\u3c6 3c 0). They are reported as a function of transverse momentum (pT) in the range 1 < pT< 4 GeV/c. Furthermore, the event-scale dependence is studied for the first time by requiring the presence of high-pT leading particles or jets for varying pT thresholds. The results demonstrate that the long-range \u201cridge\u201d yield, possibly related to the collective behavior of the system, is present in events with high-pT processes as well. The magnitudes of the short- and long-range yields are found to grow with the event scale. The results are compared to EPOS LHC and PYTHIA 8 calculations, with and without string-shoving interactions. It is found that while both models describe the qualitative trends in the data, calculations from EPOS LHC show a better quantitative agreement for the pT dependency, while overestimating the event-scale dependency. [Figure not available: see fulltext.

Search for a common baryon source in high-multiplicity pp collisions at the LHC

We report on the measurement of the size of the particle-emitting source from two-baryon correlations with ALICE in high-multiplicity pp collisions at s=13 TeV. The source radius is studied with low relative momentum p–p, p‾–p‾, p–Λ, and p‾–Λ‾ pairs as a function of the pair transverse mass mT considering for the first time in a quantitative way the effect of strong resonance decays. After correcting for this effect, the radii extracted for pairs of different particle species agree. This indicates that protons, antiprotons, Λ s, and Λ‾ s originate from the same source. Within the measured mT range (1.1–2.2) GeV/c2the invariant radius of this common source varies between 1.3 and 0.85 fm. These results provide a precise reference for studies of the strong hadron–hadron interactions and for the investigation of collective properties in small colliding systems. © 2020 CERN for the benefit of the ALICE CollaborationPeer reviewe

Charged-particle multiplicity fluctuations in Pb–Pb collisions at √sNN = 2.76 TeV

Measurements of event-by-event fluctuations of charged-particle multiplicities in Pb–Pb collisions at √sNN = 2.76 TeV using the ALICE detector at the CERN Large Hadron Collider (LHC) are presented in the pseudorapidity range |η|<0.8 and transverse momentum 0.2<pT<2.0 GeV/c. The amplitude of the fluctuations is expressed in terms of the variance normalized by the mean of the multiplicity distribution. The η and pT dependences of the fluctuations and their evolution with respect to collision centrality are investigated. The multiplicity fluctuations tend to decrease from peripheral to central collisions. The results are compared to those obtained from HIJING and AMPT Monte Carlo event generators as well as to experimental data at lower collision energies. Additionally, the measured multiplicity fluctuations are discussed in the context of the isothermal compressibility of the high-density strongly-interacting system formed in central Pb–Pb collisions.publishedVersio

Characterizing the initial conditions of heavy-ion collisions at the LHC with mean transverse momentum and anisotropic flow correlations

Correlations between mean transverse momentum and anisotropic flow coefficients or are measured as a function of centrality in Pb–Pb and Xe–Xe collisions at sqrt(sNN) = 5.02 TeV and 5.44 TeV, respectively, with ALICE. In addition, the recently proposed higher-order correlation between [pt], v2, and v3 is measured for the first time, which shows an anticorrelation for the presented centrality ranges. These measurements are compared with hydrodynamic calculations using IP-Glasma and TRENTO initial-state shapes, the former based on the Color Glass Condensate effective theory with gluon saturation, and the latter a parameterized model with nucleons as the relevant degrees of freedom. The data are better described by the IP-Glasma rather than the TRENTO based calculations. In particular, Trajectum and JETSCAPE predictions, both based on the TRENTO initial state model but with different parameter settings, fail to describe the measurements. As the correlations between [pt] and vn are mainly driven by the correlations of the size and the shape of the system in the initial state, these new studies pave a novel way to characterize the initial state and help pin down the uncertainty of the extracted properties of the quark–gluon plasma recreated in relativistic heavy-ion collisions